We received our Made in China solar powered garden lights consisting of solar panels,  lights, wires, and remote control devices.  Here are the installation instructions in English. Any help in their translation into a clearer form of English would be greatly appreciated. Thank you in advance.

1. Use two expansion screws to fix the solar panel on the wall. Plug the twist after the twist cap. The battery must be fully charged before using 3 – 5 rainy days.
2. Solar lights in the factory has been charged with electricity. You can normally light. Please check the lights before installation. Whether it is working properly.
3. The lamp and solar panels connected to the solar panel against the light, the light does not shine, unplug the connector light. Light sense normal.
4. On the front of the lamp, 5 meters above the light by AUTO (red), the button lights flash 5 under the lights And remote control normal; Note: the remote control must be remote control receiver, or remote control is not sensitive remote control distance 8-15m.
5. A: The lamp with two inflated studs on the wall, as schematically;
6. B: The solar panel ANGLE adjusts according to the light intensity and time.
7. C: lamps cannot be installed in low lying areas, so as not to soak;
8. Plug the mate and female plugs and tighten waterproof cap and install it.
9. After installation check the installation is solid, use the remote control of the lamp to check;